Annual Boiler Servicing Contracts
All annual services are carried out to a standard schedule unless instructed otherwise. If the manufacturers instructions are available these would be consulted.
My service will include:
- Isolate the gas and electrical supply to the appliance
- Dismantle the appliance to gain access to the combustion area and controls
- Inspection and clean.
I will check:
- The heat exchanger surface
- The main burner
- The pilot burner
- The fan, removing any dust from impeller
I will:
- Check and replace where necessary all safety devices
- Check all water, electrical and gas connections for soundness and safety
- Check flueways and air intake ducts and flue terminal
- Check and confirm ventilation requirements
- Carry out a flue flow test and spillage test if appliance is open flued
- Check burner gas pressure or heat input against manufacturers data
- Check all combustion chamber seals for soundness
- Check stability of appliance and any retaining devices
- Check the working gas pressure
- Carry out Efficiency test on boiler
